Non-Woven Poly Featherweight Fusible Interfacing

This 100% cotton interfacing from Callie Del is the perfect choice for those times when you need some lightweight yet crisp support for your projects.

• For use on cuffs, collars, yokes, pockets, facings, and anywhere you need lightweight crisp support in your garment sewing.
• Use as a stabilizer for T-shirt quilt blocks.
• Adds body and permanent stability for needlework and punch needle projects. Simply fuse on the back side of your base material.
• Sewing machine safe.
• If pre-shrinking is desired before applying to project, place in a bowl or sink of warm water and allow to soak for 15 minutes or more. Gently ring out and hang to dry. Do not place in washer or dryer by itself or you could remove the fusible side.

Use Instructions:
Note* It is always recommended to test the product on a scrap piece from your project before applying interfacings to the entire piece so you can adjust pressing times and heat as needed.
1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed.
2. Cut interfacings according to pattern instructions.
3. Preheat your iron to a medium or wool setting with NO STEAM.
4. Place the rough side – or glue side – on the back side or wrong side of the materials to be fused.
5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure for 8-10 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded.
6. Pressing time may need adjusting for thicker and thinner fabrics.
7. After ironing, let the pieces cool before continuing with assembly process.

• Style: Woven
  
• Type: Fusible Interfacing
  
• Content: 100% Cotton
  
• Color: White
  
• Weight: Lightweight
  
• Size: 20in x 25yds (50.8cm x 22.9m)
  
• Care: Machine wash and dry finished project according to fabric instructions.